Telnet Task Sequence; Telnet Commands - Accton Technology ES4626 Management Manual

remote host. If a connection to another remote host is desired, the current TCP connection
must be dropped.

2.2.2.2 Telnet Task Sequence

1. Configuring Telnet Server
2. Telnet to a remote host from the switch.
1. Configuring Telnet Server
Command
Global Mode
ip telnet server
no ip telnet server
telnet-server securityip <ip-addr>
no telnet-server securityip <ip-addr>
Admin Mode
monitor
no monitor
2. Telnet to a remote host from the switch
Command
Admin Mode
telnet [<ip-addr>] [<port>]

2.2.2.3 Telnet Commands

2.2.2.3.1 monitor
Explanation
Enable the Telnet server function in the
switch: the "no telnet-server enable"
command disables the Telnet function.
Configure the secure IP address to
login to the switch through Telnet: the
"no
telnet-server
<ip-addr>" command deletes the
authorized Telnet secure address.
Display debug information for Telnet
client login to the switch; the "no
monitor" command disables the
debug information.
Explanation
Login to a remote host with the Telnet
client included in the switch.
39
securityip