Switch On-Off Configuration; Switch Maintenance - Accton Technology ES4626 Management Manual

Prompt - Command line prompt messages

2.6.6 Switch on-off configuration

Click Switch on-off information node. The configuration page is shown.
The explanation of each field is as below:
RIP Status - Enable or disable RIP. See the equivalent CLI command at 15.3.2.2.17
IGMP Snooping – Enable or disable IGMP Snooping. See the equivalent CLI command at
7.2.2.1
Switch GVRP Status – Enable or disable GVRP. See the equivalent CLI command at
5.3.2.5
Check the items, and click Apply. The configuration is applied on the switch.

2.6.7 Switch maintenance

On the mainpage, click Switch maintenance on the left column. Users can make the
configuration of the switch maintenance.
Click Reboot to reboot the switch. See the equivalent CLI command at 2.1.10:
Click Reboot with the default configuration to delete the current configuration and
reboot the switch. The default configuration is used when the switch is rebooted:
98