Client Dns Server Configuration - Accton Technology ES4626 Management Manual

www.edge-core.com; for Address range for allocating, set IP address to 10.1.128.0; set
Network mask to 255.255.255.0; set DHCP client node type to broadcast node; set
Address lease timeout to 3 day 12 hour 30 minute, and then click Apply. The
configuration is applied on the switch.
11.6.1.3 Client's default gateway configuration
Click DHCP configuration, DHCP server configuration, Client's default gateway
configuration. Users can configure DHCP client's default gateway. See the equivalent CLI
command at 11.2.2.4:
DHCP pool name – Select a DHCP pool
Gateway – Configure default gateway. The default gateway IP address should be in
the same subnet as DHCP clients. Users can configure maximum eight gateway
addresses. Gateway 1 has the highest priority and Gateway 8 has the lowest priority.
For example: Select DHCP pool name to 1; set Gateway 1 to 10.1.128.3; Gateway 2
to 10.1.128.100, and then click Apply. The configuration is applied on the switch.
11.6.1.4

Client DNS server configuration

296