Port Violation Mode; Mac Binding Debug - Accton Technology ES4626 Management Manual

4.5.1.2.2.7
Port – Specify the port
Max security MAC number (1-128) – Maximum MAC number
For example: Select port Ethernet1/1; set Max security MAC number to 30, and then
click Apply. The configuration is applied on the switch. Click Remove to restore the default
setting.
4.6.2.3.2
Click MAC address table configuration, MAC address binding configuration, MAC
binding attribution configuration, Port violation mode. Users can configure port violation
mode. See the equivalent CLI command at 4.5.1.2.2.8:
Port – Specify the port
Violation mode – Set violation mode: protect mode or shutdown mode
For example: Select port Ethernet1/1; set Violation mode to protect, and then click
Apply. The configuration is applied on the switch. Click Remove to restore the default
setting.

4.6.2.4 MAC binding debug

Click MAC address table configuration, MAC address binding configuration, MAC
binding debug. Users can view secure port debug information.
4.6.2.4.1
Click MAC address table configuration, MAC address binding configuration, MAC
binding debug, Port binding MAC information query. Users can query the secure port
information:
Show port-security by interface – Show specified secure MAC address. See the
equivalent CLI command at 4.5.1.3.1.2
Show port-security address by interface – Show the secure MAC address of the

Port violation mode

Port binding MAC information query
143