Configuration Syntax - Accton Technology ES4626 Management Manual

1.2.1.1.3.5
ACL type Entry
Standard IP Type
ACL Mode
access-list ip
command
under
Mode.
Extended IP Type
ACL Mode
access-list ip
command
under
Mode.

1.2.1.2 Configuration Syntax

ES4626/ES4650 provides various configuration commands. Although all the
commands are different, they all abide by the syntax for ES4626/ES4650 configuration
commands. The general command format of ES4626/ES4650 is shown below:
cmdtxt <variable> { enum1 | ... | enumN } [option]
Conventions: cmdtxt in bold font indicates a command keyword; <variable> indicates a
variable parameter; {enum1 | ... | enumN } indicates a mandatory parameter that should
be selected from the parameter set enum1~enumN; and the square bracket ([ ]) in
[option] indicate a optional parameter. There may be combinations of "< >", "{ }" and "[ ]"
in the command line, such as [<variable>],{enum1 <variable>| enum2}, [option1
[option2]], etc.
Here are examples for some actual configuration commands:
show calendar, no parameters required. This is a command with only a
keyword and no parameter, just type in the command to run.
vlan <vlan-id>, parameter values are required after the keyword.
duplex {auto|full|half}，user can enter duplex half, duplex full or duplex
auto for this command.
snmp-server community <string>{ro|rw}, the followings are possible:
snmp-server community <string> ro
snmp-server community <string> rw
ACL Mode
Prompt
Switch(Config-Std-Nacl-
a)#
Global
Switch(Config-Ext-Nacl-
b)#
Global
25
Operates Exit
Configure Use the "exit"
parameters command to
for return
Standard Global Mode.
IP ACL
Mode
Configure Use the "exit"
parameters command to
for return
Extended Global Mode.
IP ACL
Mode
to
to