13.1.5.3 Policy-map Configuration
Click Policy-map configuration to display the extension, including five sections:
Add/Remove policy-map
Policy-map priority configuration
Policy-map bandwidth configuration
Add/Remove aggregate policer
Apply aggregate policer
13.1.5.3.1
Add/Remove Policy-map
Click Add/Remove policy-map then entry the configure page. It is equivalent to CLI
command 13.1.2.2.4.
All sections describe as following:
Policy-map name
Operation type. Add policy table or Remove policy table.
Setting policy-map name as p1, select Add policy table, then click Apply to add policy
table.
335