Basic Cluster Network Management Configuration; Cluster Network Management Configuration Sequence - Accton Technology ES4626 Management Manual

18.2 Basic Cluster Network Management Configuration

18.2.1 Cluster Network Management Configuration
Sequence
Enable or disable cluster function
Create cluster
Create or delete cluster
Configure private IP address pool for member switches of the cluster
Add or remove a member switch
Configure attributes of the cluster in the commander switch
1) Enable or disable joining the cluster automatically
2) Set holdtime of heartbeat of the cluster
3) Set interval of sending heartbeat packets among the switches of the cluster
4) Clear the list of candidate switches discovered by the commander switch
Configure attributes of the cluster in the candidate switch
1) Set interval of sending cluster registration packet
Remote cluster network management
1) Remote configuration management
2) Reboot member switch
3) Remotely upgrade member switch
1. Enable or disable cluster
Command
Global Mode
cluster run
no cluster run
2．Create a cluster
Explanation
Enable or disable cluster function
in the switch
515