Ssh Configuration Commands - Accton Technology ES4626 Management Manual

connection is protected from being intercepted and decrypted. The switch meets the
requirements of SSH2.0. It supports SSH2.0 client software such as SSH Secure Client
and putty. Users can run the above software to manage the switch remotely.
The switch presently supports RSA authentication, 3DES cryptography protocol and
SSH user password authentication etc.
2.2.3.2 SSH Server Configuration Sequence
1. SSH Server Configuration
Command
Global Mode
ssh-server enable
no ssh-server enable
ssh-user <user-name> password {0|7}
<password>
no ssh-user <user-name>
ssh-server timeout <timeout>
no ssh-server timeout
ssh-server authentication-retires
authentication-retires>
no ssh-server authentication-retries
ssh-server host-key
modulus <moduls>
Admin Mode
monitor
no monitor

2.2.3.3 SSH Configuration Commands

Explanation
Enable SSH function on the switch; the
"no
disables SSH function.
Configure the username and password of
SSH client software for logging on the
switch; the "no ssh-user <user-name>"
command deletes the username.
Configure
authentication;
timeout" command restores the default
timeout value for SSH authentication.
Configure the number of times for retrying
SSH authentication; the "no ssh-server
<
authentication-retries"
restores the default number of times for
retrying SSH authentication.
Generate the new RSA host key on the
create rsa
SSH server.
Display SSH debug information on the
SSH client side; the "no monitor"
command stops displaying SSH debug
information on the SSH client side.
42
ssh-server enable"
timeout value
the "no
command
for SSH
ssh-server
command