Web Management; Sntp/Ntp Server Configuration; Request Interval Configuration - Accton Technology ES4626 Management Manual

Parameter: N/A.
Command mode: Admin Mode
Example: Display current SNTP configuration.
Switch#show sntp
SNTP server Version
2.1.0.2 1
12.3.1.2 debug sntp
Command: debug sntp {adjust | packets | select }
no debug sntp {adjust | packets | select}
Function: Display or disable SNTP debug information.
Parameter: adjust stands for SNTP clock adjustment information; packet for SNTP
packets, select for SNTP clock selection.
Command mode: Admin Mode
Example: Display debugging information for SNTP packets.
Switch#debug sntp packets

12.4 WEB Management

Click SNTP configuration. Users can configure SNTP on the switch.
12.4.1

12.4.1 SNTP/NTP server configuration

Click SNTP configuration, SNTP/NTP server configuration. Users can configure
SNTP/NTP server address and SNTP/NTP version. See the equivalent CLI command at
12.1.1
For example: Set Server address to 12.1.1.1; set version to 4, and then click Apply.
The configuration is applied on the switch.
12.4.2

12.4.2 Request interval configuration

Click SNTP configuration, Request interval configuration. Users can configure the
Last Receive
never
307