Apply Dscp Mutation Mapping - Accton Technology ES4626 Management Manual

Operation－Set or Remove
Reset－Will set column as startup defaults. This command will not modify the
configuration.
Apply－Will take effort to all setting. This command will modify the configuration.
If would like to set the policy-map in port Ethernet 1/1. Choosing Ethernet1/1 for port and
p1 for policy-map; to select Input for port direction and Set for operation, then click Apply.
13.1.5.4.4

Apply DSCP Mutation Mapping

Click Apply DSCP mutation mapping to entry the configure page. It is equivalent to CLI
command 13.1.2.2.13.
All sections describe as following:
Port name
DSCP mutation name
Operation－Set or Remove
If would like to set the DSCP mutation in port Ethernet 1/1. Choosing Port name as
Ethernet1/1, input mu1 for DCSP mutation name, to select Set for Operation, then click
Apply.
13.1.5.5 Egress-Queue Configuration
Click Egress-queue configuration to display the extensions, including three sections:
1. Egress-queue wrr weight configuration
2. Egress-queue work mode configuration
3. Mapping CoS values to egress queues
13.1.5.5.1 Egress-queue WRR Weight Configuration
340