Global Mode - Accton Technology ES4626 Management Manual

Mode, it will also return to the Admin Mode. ES4626/ES4650 also provides a shortcut key
sequence "Ctrl+z", this allows an easy way to exit to Admin Mode from any configuration
mode (except User Mode).
Under Admin Mode, when disable command is run, it will return to User Mode. When
exit command is run, it will exit the entry and enter user entry system direct. Next users
can reenter the system on entering corresponding user name and password.
Under Admin Mode, the user can query the switch configuration information,
connection status and traffic statistics of all ports; and the user can further enter the Global
Mode from Admin Mode to modify all configurations of the switch. For this reason, a
password must be set for entering Admin mode to prevent unauthorized access and
malicious modification to the switch.
1.2.1.1.3

Global Mode

Type the config command under Admin Mode will enter the Global Mode prompt
"Switch(Config)#". Use the exit command under other configuration modes such as
Interface Mode, VLAN mode will return to Global Mode.
The user can perform global configuration settings under Global Mode, such as MAC
Table, Port Mirroring, VLAN creation, IGMP Snooping start, GVRP and STP, etc. And the
user can go further to Interface Mode for configuration of all the interfaces.
1.2.1.1.3.1
Use the interface command under Global Mode can enter the interface mode
specified. ES4626/ES4650 provides three interface type: VLAN interface, Ethernet port
and port-channel, and accordingly the three interface configuration modes.
Interface Type Entry
VLAN Type
Interface
vlan
command
Global Mode.
Ethernet Port Type
ethernet
<interface-list>
command
Global Mode.
port-channel Type
Interface Mode
Prompt
interface Switch(Config-If-
<Vlan-id> Vlanx)#
under
interface Switch(Config-
ethernetxx)#
under
interface Switch(Config-if-
23
Operates Exit
Configure Use the exit
switch IPs, etc command to
return to
Global Mode.
Configure Use the exit
supported command to
duplex mode, return
speed, etc. Global Mode.
of Ethernet
Port.
Configure Use the exit
to