Table of Contents
Advertisement
Parameter
Topology Change Trap
Configuring Other Protocols (GVRP, IGMP)
Use the following screen to configure GVRP and IGMP:
+------------------------------------------------------------------------------+
| ES3616 CheetahSwitch Workgroup-3616
| /Switch Management/Advanced Management
+------------------------------------------------------------------------------+
--------------------------------------------------------------------------------
<UpArrow><DownArrow>Move
Parameter
GVRP
IGMP
Description
A port has changed state from learning to forwarding, or from forwarding to
blocking. (Note that if a port goes from forwarding to disabled, this is not
technically a topology change.)
+----------------------------+
|
Other Protocol Settings
+----------------------------+
| |GVRP: Disabled
| |IGMP: Disabled
+----------------------------+
<Enter>Modify
Description
Enables or disables GVRP. This protocol supports the dynamic registration
of VLAN port members within this switch and across multiple switches.
(See "Automatic VLAN Registration" on page 4-7.)
Enables or disables IGMP. This protocol allows a host to inform its local
router that it wants to receive transmissions addressed to a specific multi-
cast group. (See "IGMP Snooping and IP Multicast Filtering" on page 4-10.)
Configuration options include:
Disabled: Disables IGMP on this switch.
Passive: The switch just monitors network traffic to determine which hosts
want to receive multicast traffic.
Active:
The switch actively participates in the multicast protocol and can
serve as the "querier," which is responsible for asking hosts if
they want to receive multicast traffic.
Management Guide
switch_a
|
|
|
<ESC>Previous
|
admin
|
2-41
Advertisement
Table of Contents
