Table of Contents
Advertisement
snmp packets output
too big errors
maximum packet size
no such name errors
bad values errors
general errors
response PDUs
trap PDUs
2.4.6.1.2
show snmp status
Command: show snmp status
Function: Display SNMP configuration information.
Command mode: Admin Mode
Example:
Switch#show snmp status
Trap enable
RMON enable
Community Information:
V1/V2c Trap Host Information:
V3 Trap Host Information:
Security IP Information:
Displayed information
Community string
Community access
Trap-rec-address
Trap enable
SecurityIP
Total number of SNMP packet outputs.
Number of "Too_ big" error SNMP
packets.
Maximum length of SNMP packets.
Number
of
packets
non-existent MIB objects.
Number of "Bad_values" error SNMP
packets.
Number of "General_errors" error SNMP
packets.
Number of response packets sent.
Number of Trap packets sent.
Description
Community string
Community access permission
IP address which is used to receive Trap.
Enable or disable to send Trap.
IP address of the NMS which is allowed
to access Agent
69
requesting
for
Advertisement
Table of Contents
Troubleshooting
