Accton Technology ES4626 Management Manual page 265

"port-channel" displays port aggregation information.
Command mode: Admin Mode
Usage Guide: If "port-group-number" is not specified, then information for all port groups
will be displayed.
Example: Add port 1/1 and 1/2 to port-group1.
1. Display summary information for port-group1.
Switch# show port-group 1 brief
Port-group number : 1
Number of ports in porg-group : 2
Number of port-channels : 0
Displayed information
Number of ports in group
Maxports
Number of port-channels
Max port-channels
2. Display detailed information for port-group 1.
Switch# show port-group 1 detail
Sorted by the ports in the group 1:
--------------------------------------------
port Ethernet1/1 :
both of the port and the agg attributes are not equal
the general information of the port are as follows:
portnumber: 1
partner_oper_key: 0x0001 actor_oper_port_key: 0x0101
mode of the port: ACTIVE lacp_aware: enable
begin: FALSE port_enabled: FALSE
the attributes of the port are as follows:
mac_type: ETH_TYPE speed_type: ETH_SPEED_100M
duplex_type: FULL
the machine state and port state of the port are as the follow
mux_state: DETCH
actor_oper_port_state : L_A___F_
partner_oper_port_state: _TA___F_
Maxports in port-channel = 8
Max port-channels : 1
Explanation
Port number in the port group
Maximum number of ports allowed in a group
Whether aggregated to port channel or not
Maximum port channel number can be formed by port
group.
actor_port_agg_id: 0 partner_oper_sys: 0x000000000000
port_type: ACCESS
rcvm_state: P_DIS
265
lacp_ena: FALSE
prm_state: NO_PER
ready_n: TRUE