Acl Port Binding Configuration - Accton Technology ES4626 Management Manual

Firewall default action – Configure firewall default action. "accept" is used to allow packets
to pass; "refuse" is used to deny packets to pass. See the equivalent CLI command at
9.2.2.4
For example: Set Packet filtering to Enable; set Firewall default action to accept, and then
click Apply.

9.5.7 ACL port binding configuration

Click Filter configuration. The configuration page is shown.. See the equivalent CLI
command at 9.2.2.7
The explanation of each field is as below:
Port – Configure binding port
ACL name – Configure binding ACL nameL
Ingress/Egress – Configure binding direction: Ingress/Egress
Operation type – Add; Remove
For example: Set Port to Ethernet 1/2; set ACL Name to aaa; set Ingress/Egress to in; set
Operation type to Add, and then click Apply.
257