For example: Select VID 1; select interface Ethernet1/1; select Port status to Static,
and then click Apply. All the static MAC addresses on the interface Ethernet 1/1 are
deleted.
4.6.1.3 Static MAC query
Click MAC address table configuration, MAC address table configuration, Static MAC
query. Users can query MAC address. See the equivalent CLI command at 4.4.1.1:
Query by VID – Specify VID to search static MAC address. Check "Search"
box to search MAC address according to VID.
Query by MAC –Search MAC address. Check "Search" box to search MAC
address according to MAC address typed.
Query by port – Specify port to search MAC address. Check "Search" box
to search MAC address according to port.
Port status – Static; dynamic; discard. Check "Search" box to search MAC
address according to port MAC status.
For example: Select Port status; check "Port status" box, and then click Search.
The query results are displayed in the new page.
4.6.1.4 Show mac-address-table
Click MAC address table configuration, MAC address table configuration, show
139