Accton Technology ES4626 Management Manual page 274

Command
DHCP Address Pool Mode
network-address <network-number>
[mask | prefix-length]
no network-address
default-router
[address1[address2[...address8]]]
no default-router
dns-server
[address1[address2[...address8]]]
no dns-server
domain-name <domain>
no domain-name
netbios-name-server
[address1[address2[...address8]]]
no netbios-name-server
netbios-node-type
｛b-node|h-node|m-node|p-node|<typ
e-number>｝
no netbios-node-type
bootfile <filename>
no bootfile
next-server
[address1[address2[...address8]]]
no
[address1[address2[...address8]]]
option <code> {ascii <string> | hex
<hex> | ipaddress <ipaddress>}
no option <code>
lease { days [hours][minutes]
infinite }
no lease
Global Mode
ip dhcp excluded-address
<low-address> [<high-address>]
no ip dhcp excluded-address
<low-address> [<high-address>]
Explanation
Configures the address scope that can be
allocated to the address pool
Configures default gateway for DHCP
clients
Configures DNS server for DHCP clients
Configures Domain name for DHCP
clients; the "no domain-name" command
deletes the domain name.
Configures the address for WINS server
Configures node type for DHCP clients
Configures the file to be imported for
DHCP clients on bootup
Configures the address of the server
hosting file for importing
next-server
Configures
specified by the option code
|
Configures the lease period allocated to
addresses in the address pool
Excludes the addresses in the address
pool that are not for dynamic allocation.
274
the network parameter