Arp Configuration - Accton Technology ES4626 Management Manual

resolution. ES4626/ES4650 supports both dynamic ARP and static configuration.
Furthermore, ES4626/ES4650 supports the configuration of proxy ARP for some
applications. For instance, when an ARP request is received on the port, requesting an IP
address in the same IP segment of the port but not the same physical network, if the port
enabled proxy ARP, the port would reply to the ARP its own MAC address and forward the
actual packets received. Enabling proxy ARP allows machines physically separated but of
the same IP segment ignores the physical separation and communicate via proxy ARP
interface as if in the same physical network.
14.3.2

ARP configuration

14.3.2.1 ARP Configuration Task Sequence
1. Configure static ARP
2. Configure proxy ARP
1. Configure static ARP
Command
arp <ip_address>
{[ethernet] <portName>}
no arp <ip_address>
2. Configure proxy ARP
Command
ip proxy-arp
no ip proxy-arp
14.3.2.2 ARP Forwarding Configuration Commands
14.3.2.2.1 Arp
Command: arp <ip_address> <mac_address> {[ethernet] <portName>}
no arp <ip_address>
Function: Configure a static ARP entry; the "no arp <ip_address>" command deletes a
static ARP entry.
Parameter: <ip_address> is the IP address; <mac_address> is the MAC address;
ethernet stands for Ethernet port; <portName> for the name of layer2 port.
Explanation
Configure a static ARP entry;
<mac_address>
<ip_address>" command deletes a static
ARP entry.
Explanation
Enable proxy ARP function for Ethernet
ports: the "no ip proxy-arp" command
disables the proxy ARP. .
357
the "no arp