17.2 VRRP Configuration
17.2.1
VRRP Configuration Task Sequence
1. Create/Delete virtual router (required)
2. Configure VRRP virtual IP address and VRRP interface (required)
3. Enable/disable virtual router (required)
4. Configure VRRP authentication (optional)
5. Configure VRRP accessorial parameters (optional)
(1)Configure VRRP preempt mode
(2)Configure VRRP priority
(3)Configure VRRP timer
(4)Configure VRRP monitored interface
1. Create/Delete virtual router
Command
Global Mode
[no] router vrrp <vrid>
2. Configure VRRP virtual IP address and interface
Command
VRRP Mode
virtual-ip <ip> {master| backup}
no virtual-ip
interface{IFNAME | Vlan <ID>}
no interface
3. Enable/disable virtual router
Command
VRRP Mode
enable
disable
4. Configure VRRP authentication
Command
Interface Mode
Explanation
Create/Delete virtual router
Explanation
Configure VRRP virtual IP address; the
"no virtual-ip" command removes virtual
IP address
Configure
VRRP
command
interface"
interface
Explanation
Enable virtual router
Disable virtual router
Explanation
504
interface;
the
"no
removes
the