Accton Technology ES4626 Management Manual page 82

keyword
running-config
startup-config
nos.img
boot.rom
Command mode: Admin Mode
Usage Guide: The command provides command line prompt messages. If the user
enters a command like copy <filename> tftp: // or copy tftp: // <filename> and press Enter,
the following prompt will appear:
tftp server ip address>
tftp filename>
This prompts for the TFTP server address and file name.
Example:
（1）Save the mirror in FLASH to TFTP server 10.1.1.1:
Switch#copy nos.img tftp: // 10.1.1.1/ nos.img
（2）Get the system file nos.img from TFTP server 10.1.1.1:
Switch#copy tftp: //10.1.1.1/nos.img nos.img
（3）Save active configuration file:
Switch#copy running-config startup-config
Related command: write
2.5.2.2.8 tftp-server enable
Command: tftp-server enable
no tftp-server enable
Function: Start TFTP server, the "no ftp-server enable" command shuts down TFTP
server and prevents TFTP user from logging in.
Default: TFTP server is not started by default.
Command mode: Global Mode
Usage Guide: When TFTP server function is enabled, the switch can still perform tftp
client functions. TFTP server is not started by default.
Example: enable TFTP server service.
Switch#config
Switch(Config)#tftp-server enable
Source/Target IP address
Active configuration file
Start up configuration file
System file
System boot file
82