Accton Technology ES4626 Management Manual page 359

identifier of specified VLAN; <hw-addr> for entry of specified MAC address;
"static" for static ARP entry; "dynamic" for dynamic ARP entry; "count" displays
number of ARP entries.
Command mode: Admin Mode
Usage Guide: Displays the content of current ARP table such as IP address, MAC
address, hardware type and interface name, etc.
Example:
Switch#sh arp
Total arp items: 3, matched: 3, Incomplete: 0
Address Hardware Addr
50.1.1.6 00-0a-eb-51-51-38 Vlan50
50.1.1.9 00-00-00-00-00-09 Vlan50
150.1.1.2 00-00-58-fc-48-9f
Displayed information
Total arp items
the matched
InCompleted
Address
Hardware Address
Interface
Port
Flag
14.3.3.1.2 clear arp-cache
Command: clear arp-cache
Function: Clear arp table.
Parameter: N/A.
Command mode: Admin Mode
Usage Guide: Clear the content of current ARP table, but it can't clear the current static
ARP table.
Example:
Switch#clear arp-cache
Interface Port
Ethernet3/11
Ethernet1/1
Vlan150 Ethernet3/4
Explanation
Total number of Arp entries.
ARP entry number
conditions.
ARP entries have ARP request sent without
ARP reply.
IP address of Arp entries.
MAC address of Arp entries.
Layer3 interface corresponding to the ARP
entry.
Physical (Layer2) interface corresponding to the
ARP entry.
Describes whether ARP entry is dynamic or
static.
359
Flag
Dynamic
Static
Dynamic
matching the filter