Show Ip Ospf Routing - Accton Technology ES4626 Management Manual

interface ip 51.1.1.1
interface ip 52.1.1.1
interface ip 100.1.1.1
interface ip 110.1.1.1
interface ip 150.1.1.1
router id 12.2.0.0
state NFULL priority 0
DR 150.1.1.1
last hello 59011
Displayed information
interface ip
area id
router id
router ip addr
state
priority
DR
BDR
last hello
last exch
15.4.2.2.28

show ip ospf routing

Command: show ip ospf routing
Function: Display OSPF route table information.
Default: Not displayed.
Command mode: Admin Mode
Example:
Switch#show ip ospf routing
AS internal routes:
Destination Area
60.2.127.0 0
60.1.132.0 0
60.4.67.0 0
60.3.72.0 0
60.2.77.0 0
area id 0
area id 0
area id 0
area id 0
area id 0
router ip addr 150.1.1.2
BDR 0.0.0.0
last exch 49607
Cost Dest Type Next Hop
7 DTYPE_NET 12.1.1.2
7 DTYPE_NET 12.1.1.2
7 DTYPE_NET 12.1.1.2
7 DTYPE_NET 12.1.1.2
7 DTYPE_NET 12.1.1.2
Explanation
The IP address of an interface in the
current layer3 switch.
The id of the area for the interface
The ID of the neighbor layer3 switch.
The IP address of the interface in the
neighbor layer3 switch.
Link-state status
Priority.
ID of the designated layer3 switch.
ID of the backup designated layer3 switch.
The last HELLO packet.
The last packet exchanged.
413
ADV rtr
6.1.1.2
6.1.1.2
6.1.1.2
6.1.1.2
6.1.1.2