Vrrp Configuration Commands - Accton Technology ES4626 Management Manual

ip vrrp authentication mode text
no ip vrrp authentication mode
ip vrrp authentication string <string>
no ip vrrp authentication string
5. Configure VRRP accessorial parameters
（1）Configure VRRP preempt mode
Command
VRRP Mode
preempt-mode {true| false}
（2）Configure VRRP priority
Command
VRRP Mode
priority < priority >
（3）Configure VRRP timer
Command
VRRP Mode
advertisement-interval <time>
（4）Configure VRRP monitored interface
Command
VRRP Mode
circuit-failover {IFNAME | Vlan <ID>}
no circuit-failover
17.2.2

VRRP Configuration Commands

17.2.2.1 router vrrp
Command: router vrrp <vrid>
no router vrrp <vrid>
Function: Create/Delete virtual router
Parameter: < vrid > is the sequence number of the virtual router, valid range is 1 to 255.
Configure authentication mode of VRRP
messages sent by the current interface;
the "no ip vrrp authentication mode"
command restores
authentication mode.
Configure the authentication string of the
VRRP packets sent on the interface; the
"no
ip vrrp authentication
restores the default authentication string.
Explanation
Configure VRRP preempt mode
Explanation
Configure VRRP priority
Explanation
Configure VRRP timer (in seconds)
Explanation
Configure the VRRP monitored interface;
the "no
circuit-failover"
deletes the monitored interface.
505
the default
string"
command