Accton Technology ES4626 Management Manual page 334

13.1.5.2.1 Add/Remove Class-map
Click Add/Remove class-map then entry the configure page. It is equivalent to CLI
command 13.1.2.2.2.
All sections describe as following:
Class - map name
Operation type－Create class table and Remove class table.
Adding class-map name, specify the class-map name, select Create class table, then click
Apply.
13.1.5.2.2 Class-map Configuration
Click Class-map configuration then entry the configure page. It is equivalent to CLI
command 13.1.2.2.3.
All sections describe as following:
Class-map name
Match action which including:
access-group First valid－mapping to ACL table. Parameter is the assign
number or name of ACL. First valid means Match value 1 is valid.
ip dscp－mapping to DSCP. Parameter is the DSCP value list.
ip precedence－mapping to IP priority. Parameter is IP priority value list.
vlan－mapping to VLAN ID. Parameter is VLAN ID value list.
Match value 1-8－mapping to parameter value table. Input ACL value to
Match value 1 for mapping ACL.
Operation type－Set or Remove.
To configure Class-map c1, select c1 to Class-map name, select ip dscp to Match
action, input 3 to Match value 1, select set to Operation type, then click Apply.
334