Accton Technology ES4626 Management Manual page 167

for access port. Users can add Access port to the specified VLAN, or delete Access port
from the specified VLAN:
Port – Specify the port
Vlan ID – Specify VLAN ID
For example: Select port Ethernet1/1; select Vlan ID 1, and then click Apply. The port
Ethernet 1/1 is added to VLAN 1.
The results are shown in Information Display window:
5.5.1.6 Allocate port for Vlan
Click Vlan configuration, Vlan configuration, Enable/Disable Vlan ingress rule. Users
can configure VLAN ingress rules.
5.5.1.6.1
Click Vlan configuration, Vlan configuration, Enable/Disable Vlan ingress rule,
Disable Vlan ingress rules. Users can enable or disable VLAN ingress rules:
For example: Select port Ethernet1/1, and then click Apply. VLAN ingress rules on
Ethernet 1/1 are disabled. Click Default, VLAN ingress rules on Ethernet 1/1 are enabled.
Disable Vlan ingress rules
167