Interface is Vlan2
Priority is 100
Advertisement interval is 1 sec
Preempt mode is TRUE
VrId <10>
State is Initialize
Virtual IP is 10.1.10.1 (IP owner)
Interface is Vlan1
Configured priority is 255, Current priority is 255
Advertisement interval is 1 sec
Preempt mode is TRUE
Circuit failover interface Vlan1, Priority Delta 10, Status UP
Item
State
Virtual IP
Interface
priority
Advertisement interval
Preempt
Circuit failover interface
17.2.4.1.2
debug vrrp
Command: debug vrrp [ all | event | packet [recv| send] ]
no debug vrrp [ all | event | packet [recv| send] ]
Function: Display the state changes and messages sent and received for the standby
group; the "no debug vrrp [ all | event | packet [recv| send] ]" command stops
displaying debug information.
Command mode: Admin Mode
Default: Debug information is not displayed by default.
Example:
Switch# debug vrrp
VRRP SEND[Hello]: Advertisement sent for vrid=[10], virtual-ip=[10.1.10.1]
VRRP SEND[Hello]: Advertisement sent for vrid=[10], virtual-ip=[10.1.10.1]
VRRP SEND[Hello]: Advertisement sent for vrid=[10], virtual-ip=[10.1.10.1]
VRRP SEND[Hello]: Advertisement sent for vrid=[10], virtual-ip=[10.1.10.1]
Explanation
State
Virtual IP address
Interface name
priority
timer
Preempt mode
Monitored interface information
512