Mvr Vlan - Dell Networking 2024 Reference Manual

User Guidelines
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message
Example
console(config)#interface Gi1/0/1
console(config-if-Gi1/0/1)#switchport access vlan 10
console(config-if-Gi1/0/1)#mvr
console(config-if-Gi1/0/1)#mvr type receiver
console(config-if-Gi1/0/1)#exit
console(config)#mvr mode dynamic
console(config)#mvr querytime 10

mvr vlan

Use the mvr vlan command in Global Configuration mode to set the MVR
multicast VLAN. Use the no form of the command to set the MVR multicast
VLAN to the default value.
Syntax
1–4094
mvr vlan
no mvr vlan
1–4094
• —
Specifies the port on which multicast data is expected to be received.
Source ports should belong to this VLAN.
Default Configuration
The default value is 1.
Command Mode
Global Configuration
User Guidelines
The following table lists the completion messages.
Message Description
Defaulting MVR query response time.
None
Multicast VLAN Registration Commands
579