Dell Networking 2024 Reference Manual page 595

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands in the interface range context are executed independently on
each interface in the range. If the command returns an error on one of the
interfaces, it stops the execution of the command on subsequent interfaces.
Example
The following example shows how port-channels 1, 2 and 8 are grouped to
receive the same command.
console(config)# interface range port-channel 1-2,8
console(config-if)#
hashing-mode
Use the hashing-mode command to set the hashing algorithm on trunk ports.
Use the no hashing-mode command to set the hashing algorithm on trunk
ports to the default (7).
Syntax
mode
hashing-mode
mode — Mode value in the range of 1 to 7.
•
Range: 1–7:
• 1 — Source MAC, VLAN, EtherType, source module, and port ID
• 2 — Destination MAC, VLAN, EtherType, source module, and port ID
• 3 — Source IP and source TCP/UDP port
• 4 — Destination IP and destination TCP/UDP port
• 5 — Source/destination MAC, VLAN, EtherType, and source
MODID/port
• 6 — Source/destination IP and source/destination TCP/UDP port
Port Channel Commands
595