Show Vpc Consistency-Parameters - Dell Networking 2024 Reference Manual

VPC id# 1
-----------------
Config mode.................................... Enabled
Operational mode............................... Enabled
Port channel................................... Po2
Local MemberPorts
-----------------
Gi1/0/23
Gi1/0/24
Peer MemberPorts
----------------
Gi1/0/23
Gi1/0/24

show vpc consistency-parameters

Use the show vpc consistency parameters on both MLAG peers to display
MLAG related configuration information in a format suitable for comparison
with the other MLAG peer.
Syntax
show vpc consistency-parameters { global | interface
port-channel-number —A valid port-channel identifier (range 1-128).
•
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode and above
User Guidelines
There are no user guidelines for this command.
618
MLAG
Status
------
UP
UP
Status
------
UP
UP
port-channel-number
}