Show Vpc Brief - Dell Networking 2024 Reference Manual

show vpc brief

Use the show vpc brief command to display the MLAG global status. The
command displays the current MLAG operational mode as well as the
peerlink and keepalive status is also displayed. The number of configured and
operational MLAGs along with the system MAC and role are also displayed.
Syntax
show vpc brief
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged EXEC mode and above
User Guidelines
Only the Primary switch maintains the member status of the Secondary
switch. The Secondary switch does not maintain or show the status of the
Primary switch peer members.
A VPC instance may show as enabled even if all of the port-channels that are
members of the VPC are disabled or all of the links in the port channels are
disabled. A VPC will show as disabled if peer-link (or DCPDP) connectivity is
lost.
The Keep-alive admin status field shows the status of the peer-link protocol.
The VPC operational status shows the overall MLAG status.
The Peer detection admin status field shows the status of the DCPDP
protocol.
Example
MLAG-Peer-A#show vpc brief
VPC config Mode................................ Enabled
Keepalive config mode.......................... Enabled
VPC operational Mode........................... Enabled
Self Role...................................... Primary
Peer Role...................................... Secondary
616
MLAG