Ricoh 920F Operating Instructions Manual page 838

Paper Type: Tray 1 - 3
Sets the display so you can see what type of paper is loaded in the paper tray 1 - 3.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the paper tray 1 - 3 are as follows:
• [No Display (Plain Paper)], [Recycled Paper], [Color Paper], [Letterhead], [Preprinted Paper],
[Bond Paper], [Cardstock], [Prepunched Paper], [Special Paper]
The default setting is [No Display (Plain Paper)].
The default setting for [APS] (Auto Paper Select) is "On".
The default setting for [Duplex] is "On".
[APS] (Auto Paper Select) can only be selected for the copier function if [No Display (Plain Paper)]
and [Recycled Paper] are selected. If [Off] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper
Sizes and Types", About This Machine.
Ppr Tray Priority: Copier (copier)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
Ppr Tray Priority: Fax (facsimile)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
Ppr Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is [Tray 1].
• p.18 "Accessing User Tools"
Tray Paper Settings
1
25