Etherauth; Etherconfig; Help - Ricoh 920F Operating Instructions Manual

4. Monitoring and Configuring the Printer
ether
wlan
Deleting the Domain Name
msh> domainname "interface_name" clear name

etherauth

4
Use the "etherauth" command to display or modify the authentication related parameters for Ethernet.
View settings
msh> etherauth
802.1x Configuration
msh> etherauth 8021x {on|off}
• {on} means "active" and {off} means "inactive".

etherconfig

Use the "etherconfig" command to view and configure the Ethernet parameters.
View settings
msh> etherconfig
Specify Ethernet speed
msh> etherconfig speed {auto|10f|10h|100f|100h}
• auto = Auto Select
• 10f = 10 Mbps Full Duplex
• 10h = 10 Mbps Half Duplex
• 100f = 100 Mbps Full Duplex
• 100h = 100 Mbps Half Duplex
• The default is "auto".

help

Use the "help" command to display the available command list and the procedures for using those
commands.
168
Interface Interface set
Ethernet interface
IEEE 802.11 interface