Ricoh 920F Operating Instructions Manual page 600

2. Press the Quick Dial key in which the destination's number is programmed.
The destination's name is shown on the display.
If you make a mistake, press the [Clear/Stop] key and try again.
To select more destinations, repeat steps 1 and 2.
When you add destinations, if you switch the destination type between
and then repeat steps 1 and 2.
3. Press the [Start] key.
• To check the contents of Quick Dial keys, print the destination list using Address Book:Print List under
System Settings. For details about the printing method, see "System Settings", Network and System
Settings Guide.
• You do not have to press [Add Dest] when adding the same type of destination as you specified in
step 1 using the Quick Dial keys.
Specifying a group of destinations using the Quick Dial key
If you program multiple destinations into a group, you can send documents to all destinations in that group
using just a few keystrokes.
Destinations programmed in a group are indicated by a group icon .
• In the destination list, program an individual fax number, IP-Fax destination, e-mail address, and/or
groups of destinations. For details about programming destinations, see "Registering Addresses and
Users for Facsimile/Scanner Functions", Network and System Settings Guide.
BRJ030S
Specifying a Destination
and , press [Add Dest],
1
59