Placing originals
To correctly display the top/bottom orientation of the scanned original on a client computer, the placement
of the original and the settings made on the control panel must match.
Place originals correctly by referring to the following table:
Exposure Glass
Turn the original over, and then place it face down on the exposure glass.
Original orientation and control panel key selection
Original orientation
top edge touches top left corner of exposure glass
top edge touches rear of exposure glass
ARDF
Hold the original so that its text is in the natural readable orientation, and then place it face up in the
ARDF.
Original orientation and control panel key selection
Original orientation
top edge placed first
BPS005S
BPS006S
BRB012S
Specifying Send Options
Control panel key
Control panel key
7
139