Ricoh 920F Operating Instructions Manual page 384

3. Enter the name, and then press the [OK] key
4. Press [Details] and [Reg. No.] to specify registration information. After you have made all
settings, press the [OK] key.
For details about specifying registration information, see "Registering Addresses and Users for
Facsimile/Scanner Functions", Network and System Settings Guide.
5. Press the [Escape] key
• Depending on the security settings, [Program] may not appear. In such case, you cannot complete
the registration.
• To register in the machine's address book a destination searched for and selected from the LDAP
server, display the destination, and then press [Program].
Specifying E-mail Destinations
1
35