22.
Enter the path, and then press the [OK] key.
You can also enter an IPv4 address.
23.
Press [Com.Test] to check the path is set correctly.
24.
Press [Exit].
25.
Press the [Escape] key.
26.
Press [End].
27.
Press the [OK] key.
28.
Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• You can enter up to 64 characters for the user name.
• You can enter up to 64 characters for the password.
• You can enter a server name using up to 64 characters.
Registering Folders
5
299