Sending Scan Files Using Wsd; Before Sending Scan Files Using Wsd; Overview Of Sending Scan Files Using Wsd - Ricoh 920F Operating Instructions Manual

3. Sending Scan Files Using WSD

If your computer has a WSD-compliant operating system such as Windows Vista, you can send scan files
to the computer or send scanning requests to this machine from the computer simply by connecting the
computer to the network.

Before Sending Scan Files Using WSD

This section explains the preparations and procedures for using WSD.
This machine provides the following two forms of WSD scanning:
• WSD (Push Type)
This allows you to send scan files to a client computer through the network.
To begin a scan job, press the [Start] key on the machine. Note that you cannot scan originals from
client computers.
• WSD (Pull Type)
This allows you to send scanning requests to this machine from a client computer through the network.
To begin a scan job, send a scanning request from a client computer.
• This function is available only if your computer has a WSD-compliant operating system such as
Windows Vista. Check your computer's settings before using the WSD scanner.
• The example explanations shown in this manual are based on Windows Vista Ultimate.
• When you configure the personal authentication function or user code authentication, the WSD
scanner function will be automatically disabled. To perform WSD scanning again, you must enable
the WSD scanner function. For details about enabling this function, see "Enabling WSD using Web
Image Monitor".
• p.84 "Enabling WSD using Web Image Monitor"

Overview of Sending Scan Files Using WSD

This section describes the process of sending scan files using WSD.
3
81