Ipv6; Logout; Lpr - Ricoh 920F Operating Instructions Manual

4. Monitoring and Configuring the Printer
Viewing settings
The following command displays the current IPsec settings:
msh> ipsec
• For details about displayed contents, see Security Reference.

ipv6

Use the "ipv6" command to display and configure IPv6 settings.
View settings
4
msh> ipv6
IPv6 stateless address
msh> ipv6 stateless {on|off}
If "on" is selected, IPv6 requests information required for maintaining stateful connection to the router
for as long as the printer power is turned on. This setting allows information from the router to be
obtained constantly, and periodically refreshes the effective period of the stateless address.

logout

Use the "logout" command to save the changes and quit telnet.
Quit telnet
msh> logout
A confirmation message appears.
{yes|no|return}
Enter [yes], [no] or [return] by typing the word, and then press the [Enter] key.
To save the changes and quit telnet, enter [yes].
To discard the changes and quit telnet, enter [no].
To continue making changes, enter [return]

lpr

Use the "lpr" command to view and configure LPR settings.
View settings
msh> lpr
172