Ricoh 920F Operating Instructions Manual page 428

1. Press the [Check Destination] key.
The illustration is an example. The actual appearance may be different.
2. Press the [ ] or [ ] key to display the destination you want to register, and the press
[Program].
3. Enter the name, and then press the [OK] key.
4. Press [Details] and [Reg. No.] to specify registration information. After you have made all
settings, press the [OK] key.
• Depending on the security settings, [Program] may not appear. In such case, you cannot complete
registration. For details, consult your administrator.
BRB004S
Specifying Scan to Folder Destinations
2
79