Ricoh 920F Operating Instructions Manual page 1293

4. Troubleshooting When Using the Printer Function
Problem
Duplex printing is
malfunctioning.
Duplex printing is
malfunctioning.
Duplex printing is
malfunctioning.
4
When using Windows
2000/XP/Vista, Windows
Server
2003/2003R2/2008,
combined printing or booklet
printing does not come out as
expected.
A print instruction was issued
from the computer, but
printing did not start.
If the problem cannot be solved, contact your sales or service representative.
When paper is not fed properly
Problem
Images are printed at a slant. The tray's side fences might
Sheets are feeding in
together, resulting in jams.
If the problem cannot be solved, contact your service representative.
76
Cause
Duplex printing cannot be
done with paper set in the
bypass tray.
You have loaded thick paper,
OHP transparencies, or
labels specified as the paper
type.
Duplex printing cannot be
done with a tray for which
[Off] has been specified as
Paper Type on the System
Settings menu.
The correct application or
printer driver settings are not
made.
User code management may
have been set.
Cause
not be locked.
Sheets are sticking together.
Solution
When using duplex printing, make
settings to use paper from a tray other
than the bypass tray.
Specify another paper type.
Change the Paper Type setting for the
tray to [On] on the System Settings menu.
See "System Settings", Network and
System Settings Guide
Make sure the application's paper size
and orientation settings match those of
the printer driver. If a different paper size
and orientation are set, select the same
size and orientation.
Ask the administrator about valid user
codes. To print, the user code must be
entered from the printer driver.
Solution
Check the side fences are locked. See
"Changing the Paper Size", About This
Machine .
Fan the sheets thoroughly before
loading them. Alternatively, feed the
sheets into the machine one at a time.
.