Ricoh 920F Operating Instructions Manual page 1034

Hide thumbs Also See for 920F:
Table of Contents

Advertisement

Message
session_IPX <community name> not defined.
Set context to <NDS context name>
shutdown signal received. network service
rebooting...
Smbd start. (NetBIOS)
SMTPC: failed to get smtp server ip-address.
SMTPC: failed to connect smtp server. timeout.
SMTPC: refused connect by smtp server.
Problem and solutions
The requested community name is not defined.
The NDS context name <NDS context name> has
been set.
The network reboot process is starting.
SMBD (Server Message Block Daemon) has been
started.
The SMTP server IP address could not be obtained.
This could be because:
• The specified DNS server could not be found.
• No connection to the network has been
established.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address could
not be found in the DNS server.
Connection to the SMTP server failed due to
timeout. This could be because the specified SMTP
server name is incorrect, or no connection to the
network has been established, or the network
configuration is incorrect, so there is no response
from the SMTP server. Check the SMTP server
name, or the network connection and
configuration.
Connection to the SMTP server is denied. This could
be because server other than the SMTP server has
been specified, or the specified SMTP server port
number is incorrect. Check the SMTP server name,
port number, or the SMTP server port number.
Message List
4
221

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ld220fLd220spf920spf

Table of Contents