Ricoh 920F Operating Instructions Manual page 1337

8. Start Web Image Monitor, and then log on to the machine as the administrator.
For details about logging on to Web Image Monitor as an administrator, see "Using Web Image
Monitor to Configure Administrator Authentication".
9. Install the device certificate.
For information on how to install the device certificate, see "Protection Using Encryption".
10. Enable secure sockets layer (SSL).
11. Enter the administrator's user name and password.
For details about specifying the administrator user name and password, see "Registering the
Administrator".
The administrator's default account (user name: "admin"; password: blank) is unencrypted between
steps 7 to 10. If acquired during this time, this account information could be used to gain unauthorized
access to the machine over the network.
If you consider this risky, we recommend that you specify a temporary administrator password for
accessing Web Image Monitor for the first time, before connecting to the network in step 7.
We recommend you change the supervisor's password also. For details about changing the
supervisor's user name and password, see "Changing the Supervisor".
• p.35 "Using Web Image Monitor to Configure Administrator Authentication"
• p.181 "Protection Using Encryption"
• p.27 "Registering the Administrator"
• p.242 "Changing the Supervisor"
Setting Up the Machine
1
15