Installing Desktopbinder Lite From The Supplied Cd-Rom - Ricoh 920F Operating Instructions Manual

5. Delivering Scan Files
Select [Scan Settings], [Destination List Settings], [Send Settings], [Administrator Tools], and then
configure the relevant settings.
• p.155 "Scanner Features"
Configure the settings in ScanRouter delivery software
Using SR Manager (a tool for the ScanRouter delivery software), register this machine as an I/O device.
In addition, register destinations and specify such settings as the delivery type and sender.
For details about settings, see the manuals supplied with the ScanRouter delivery software.
• To view files delivered to an in-tray, DeskTopBinder Lite must be installed on the client computer. For
details about installing DeskTopBinder Lite, see "Installing DeskTopBinder Lite from the Supplied CD-
5
ROM".
• The settings you must configure in [System Settings] vary depending on your network environment.
For details about network settings, see "Connecting the Machine", Network and System Settings
Guide.
• p.106 "Installing DeskTopBinder Lite from the Supplied CD-ROM"

Installing DeskTopBinder Lite from the Supplied CD-ROM

This section explains how to install DeskTopBinder Lite on a client computer from the supplied CD-ROM.
To view or receive files delivered to the in-trays, you must install DeskTopBinder Lite on the client computer.
1. Make sure Windows is running on the client computer, and then insert the CD-ROM into the
CD-ROM drive.
The installer starts.
2. Click [DeskTopBinder Lite].
The [DeskTopBinder Lite Setup] dialog box appears.
For the subsequent installation steps, see the Setup Guide displayed from the [DeskTopBinder Lite
Setup] dialog box.
• Before you start the installation, check the system requirements for DeskTopBinder Lite. For details,
see "DeskTopBinder Lite".
• You can install the software using the auto-run program. For details about the auto-run program, see
"Auto-Run Program".
106