Ricoh 920F Operating Instructions Manual page 493

7. Various Scan Settings
• To deliver files, set the file type using the delivery server computer. For details, see the manuals supplied
with the ScanRouter delivery software.
File types can be specified when sending files by e-mail or Scan to Folder, sending stored files by e-mail
or Scan to Folder, and saving files on a removable memory device.
You can select one of the following file types:
• [Single Page:TIFF/JPEG], [Single Page:PDF]
If you select a single-page file type when scanning multiple originals, one file is created for single
page and the number of files sent is the same as the number of pages scanned.
• [Multi-page:TIFF], [Multi-page:PDF]
If you select a multi-page file type when scanning multiple originals, scanned pages are combined
and sent as a single file.
Selectable file types differ depending on the scan settings and other conditions. For details about file
types, see "Notes About and Limitations of File Types".
1. Press [Options].
7
2. Press the [ ] or [ ] key to select [File Type], and then press the [OK] key.
3. Press the [ ] or [ ] key to select the file type, and then press the [OK] key.
"Programmed" appears, and then the Send Options screen appears.
4. Press the [Escape] key.
• p.145 "Notes About and Limitations of File Types"
144