Search By Destination List - Ricoh 920F Operating Instructions Manual

7. Select a destination using [ ] or [ ], and then press [ ] to specify it (put a tick against it).
Multiple destinations can be selected.
Press [ ] to deselect a destination.
8. Press the [OK] key.
• If no destination matches the specified text, the "Specified destination is not programmed." message
appears. Press [Exit] to return to the display of step 4.
• You cannot specify destinations twice. If you try, the "This destination has already been programmed."
message appears. Press [Exit] to return to the standby screen.
• Press [Add Dest] to specify other destinations.
• For details about text entry, see "Entering Text", About This Machine.

Search by Destination List

This section explains how to search for a destination registered in the Address Book using the destination
list.
• If [LDAP Search] is set to [Off] in Administrator Tools, in the System Settings menu, the display for
selecting either [Search Address Book] or [Search LDAP] does not appear.
1. Press [ ] to switch the destination type between
Searching for a Destination in the Address Book
and .
1
77