Ricoh 920F Operating Instructions Manual page 658

6. Press the User Function key ([F1] to [F3]) programmed with [SUB/SEP Code].
7. Enter a SEP Code, and then press the [OK] key.
If you make a mistake, press the [Clear/Stop] key before pressing the [OK] key, and then try again.
8. When a password is required, enter the PWD Code using the number keys, and then press
the [OK] key.
When a PWD Code is not required, just press the [OK] key.
The standby screen returns.
9. Press the [Start] key.
• Make sure the number of digits in the SEP Code matches the specification of the machine from which
you are receiving. For the maximum number of digits for the SEP Code of this machine, see "Maximum
Values".
• You can enter numbers,
• You can store SEP Codes as well as names and fax numbers in the destination list. For registering into
the destination list, see "Registering Addresses and Users for Facsimile/Scanner Functions", Network
and System Settings Guide.
• The SEP Code is printed on lists and reports.
BRJ037S
, , and spaces.
Setting SEP Codes for Reception
2
117