Ricoh 920F Operating Instructions Manual page 366

Hide thumbs Also See for 920F:

Table of Contents

Select [Network], and then press the [OK] key.

Select [Machine IPv4 Address] to specify the machine's IPv4 address, and then press the

To specify a static IPv4 address for this machine, press [Specify], and then press the left selection key

to select [IP Add.]. Enter the IP address by using the number keys, and then press the [OK] key.

To obtain an IPv4 address from a DHCP server automatically for this machine, select [Auto-Obtain

(DHCP)], and then press the [OK] key.

Select [IPv4 Gateway Address] to make necessary settings, and then press the [OK] key.

Select [Effective Protocol], select [IPv4], and then select [Active]. Then press the [OK] key.

Select [LAN Type] and [Ethernet], and then press the [OK] key.

Select [File Transfer], select [SMTP Server], and then press the [OK] key.

Select [Server Name], enter the SMTP server host name or IPv4 address, and then press the

• If an extended wireless LAN board (optional) is installed, press [LAN Type] on [Interface Settings],

then press [Ethernet] and then configure the network settings.

Configuring the necessary settings in [Scanner Features]

Using [Scanner Features], you can make or change various settings related to the scanner function, such

as compressing scan data or printing the scanner journal. Configure the scanner settings according to your

environment and how you will be using the machine.

This section explains how to display the Scanner Features screen. For details about the settings on this

screen, see "Scanner Features".

Press the [User Tools/Counter] key.

Before Sending Scan Files by E-mail

Show Quick Links

Chapters

Table of Contents

Ld220f Ld220spf 920spf