Changing The User Parameters - Ricoh 920F Operating Instructions Manual

6. Fax Features
Switch: 39, Bit:7, 6, 5, 4, 3, 2, 1, 0
Interval (in minutes) between resend attempts after failing to forward a fax from a sender (including
special senders) to a folder destination
• 00000000: 0 minute(s)

Changing the User Parameters

This section describes how to set parameters.
• Access to some User Parameter Setting may require options, or other settings may need to be made
beforehand.
• It is recommended that you print and store the "Parameter Settings List" when you program or change
parameter settings.
• Do not change any bit switches other than those shown on the previous pages.
6
1. Select [Fax Features] using [ ] or [ ], and then press the [OK] key.
2. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
3. Select [Parameter Setting] using [ ] or [ ], and then press the [OK] key.
4. Select [Parameter Setting] using [ ] or [ ], and then press the [OK] key.
234
11111111: 255 minute(s)