Wins - Ricoh 920F Operating Instructions Manual

4. Monitoring and Configuring the Printer
username2 "character string"
domain "character string"
4
password "character string"
srvcert {on|off}
imca {on|off}
srvid "character string"
Connectinfo
clear {a each command|all}
miccheck {on|off}

wins

Use the "wins" command to configure WINS server settings.
192
Parameter
You can specify the phase 2 username for EAP-TTLS/PEAP
phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes).
The default is blank.
You can specify the login domain name for the Radius server.
The characters you can enter are ASCII 0x20-0x7e (31
bytes), but not "@" or "\".
The default is blank.
You can specify the login for the Radius server.
Usable characters: ASCII 0x20-0x7e (128 bytes). The
default is blank.
You can set the server certificate. The default is "off".
You can enable or disable the certificate when the
intermediate certificate authority is present. The default is
"off".
You can set the server ID and subdomain of the certificate
server.
Usable characters: ASCII 0x20-0x7e (128 bytes). The
default is blank.
Obtains connection information.
Returns the selected setting to its default value.
If you specify "all", all settings will be restored to their default
values.
You can enable or disable the MIC check function.
The default setting is "On" (enabled).
If you specify "Off", you cannot perform MIC checks. We
recommend you specify "On" for the MIC check function
when using this machine.
Value configured