Ricoh 920F Operating Instructions Manual page 877

2. Connecting the Machine
1. Attach one ferrite core at the machine end of the Ethernet cable, and then attach the other
ferrite core about 10 cm (4 inch) (1) from this core.
2
2. Make sure the main power switch of the machine is off.
3. Connect the Ethernet interface cable to the Gigabit Ethernet port.
4. Connect the other end of the Ethernet interface cable to a network connection device such
as a hub.
5. Turn on the main power switch of the machine.
1. Indicator (yellow)
When 100BASE-TX is operating, the LED is lit yellow. When 10BASE-T is operating, it is turned off.
64
BKR011S
BKR008S
BKR021S